Can anyone advise me the best method for delaying a track by say 2.8 MS using Cubase 5? Is there a plugin that gives me a readout with milliseconds accuracy that I can set? Thanks Steve.
The Cedar Room schreef: > Can anyone advise me the best method for delaying a track by say 2.8 MS > using Cubase 5? Is there a plugin that gives me a readout with milliseconds > accuracy that I can set? The Track Inspector has a delay setting that claims to be accurate to 10 microseconds. That is, the control has two decimal places and claims to be in milliseconds. However, that doesn't make sense at current sample rates. If you want to be really sure, calculate the amount of samples that you need to delay the track with. E.g. at a sample rate of 44100Hz, your 2.8 ms would work out as 2.8*44.1 samples or 123 samples. Set the primary time display to samples. Make sure the information line on top of the project window is visible. Select all events on the track, and increase the start time with 123 samples. Done. Does this help? Jos. -- Ardis Park Music www.ardispark.nl
On Wed, 02 Dec 2009 05:13:43 GMT, "The Cedar Room" <> wrote: >Can anyone advise me the best method for delaying a track by say 2.8 MS >using Cubase 5? Is there a plugin that gives me a readout with milliseconds >accuracy that I can set? Use the offset setting in the Inspector. Or turn Snap off, zoom right in and physically move the part. CubaseFAQ page: http://www.laurencepayne.co.uk/CubaseFAQ.htm
If you want to use a plugin, there's ... http://www.voxengo.com/product/sounddelay/ "The Cedar Room" <> wrote in message news:bImRm.59415$... > Can anyone advise me the best method for delaying a track by say 2.8 MS > using Cubase 5? Is there a plugin that gives me a readout with > milliseconds accuracy that I can set? > > Thanks > > Steve. > >
Thanks everyone for comments it was very helpful, problem solved. Steve <> wrote in message news:gvxRm.17808$2... > If you want to use a plugin, there's ... > > http://www.voxengo.com/product/sounddelay/ > > "The Cedar Room" <> wrote in message > news:bImRm.59415$... >> Can anyone advise me the best method for delaying a track by say 2.8 MS >> using Cubase 5? Is there a plugin that gives me a readout with >> milliseconds accuracy that I can set? >> >> Thanks >> >> Steve. >> >> >
