Recent content by cullam

  1. C

    Footswitch effects on a Korg Krome

    Hi Guys. I recently bought a Bass FS-5L footswitch, to try control my rotary speaker effect speed. And for the life of me, I can't get it working. Is anyone familiar with how to do this on a Korg workstation? I turned the footswitch to MM82 in the global settings, and assigned my speed control...
  2. C

    VB3 on a Receptor, with an Oxygen 61 - slider issues

    MidiOX doesn't show anything out of the ordinary. All sliders are sending on the global channel, and they are all sending the same cc messages that I'm expecting. So far, it seems like the only difference is which messages get picked up at the other end. So far, 1, 5, 41, and 43 work. I've tried...
  3. C

    VB3 on a Receptor, with an Oxygen 61 - slider issues

    The manual was actually the first place I went. Having carefully checked that a slider is assigned to channel 1, and is sending cc40, and looking at a drawbar that is set to listen on channel one, for cc40, there is no communication. The next slider over is set to cc41. channel 1. I set the...
  4. C

    VB3 on a Receptor, with an Oxygen 61 - slider issues

    I currently am, actually, but I'll hook it up to my computer when I get home, and see what I can see. And yes, I am using my receptor with a mouse and a monitor, to set it up. So to try and set one of the VB3s draw bars to a perticular slider, I'm right clicking on it, selecting Midi Learn...
  5. C

    VB3 on a Receptor, with an Oxygen 61 - slider issues

    As the "computer" I'm running this on is a Muse Receptor, rather than a mac or PC, I don't think I can run MIDIOX. As far as I understand it, the Midi Learn function ought to be able to identify what CC codes a slider is sending, and set a paramater to listen for those codes. But it only works...
  6. C

    VB3 on a Receptor, with an Oxygen 61 - slider issues

    Hey gang. So, I'm trying to get a basic Hammond organ setup working, assigning the draw bars to the sliders of my Oxygen. The VST I'm using is the VB3, and I'm using a Receptor as my main midi machine. The trouble I'm having is that when I try to assign the sliders to the draw bars, only certain...
  7. C

    Switching from a hardware setup to a software setup for professional gigs.

    Well, mono isn't an issue for me. We use a stereo in ear monitor rig, and always go stereo to the mains. And at this point, I'd much prefer to start setting up my cross keyboard, multi layered performance modes on something with a proper GUI, and the ability to back up and transfer them, rather...
  8. C

    Switching from a hardware setup to a software setup for professional gigs.

    Yeah, the Receptor definitely looks interesting. It's a bit pricier, which is fine, unless I don't think much of the sounds it comes with already. Because then I'd have to also spend a lot of money on extra plug ins. Any idea how the grand piano, and the organs are in the defaults that are included?
  9. C

    Switching from a hardware setup to a software setup for professional gigs.

    Hi gang. I know there is a recent topic on software suggestions for live performance, but the ones I saw there seemed to be aimed at a lower level then I had in mind. Basically, I've been using a Korg Triton 61 for 12 years, with a weighted 88 key board attatched to it, midi'd together so that...
  10. C

    Creating new sounds, to be controlled by MIDI

    hmmm... that one's definitely got some potential, although it's still not exactly what I need. I'll do some more research into it though. Let me re-phrase my question: Assume that I have the means of creating a separate wave file for each note on the keyboard. These samples are similar to...
  11. C

    Creating new sounds, to be controlled by MIDI

    I haven't used either of those. I just gave them a quick look-over, and I don't think they'll do what I had in mind. However, it is possible that just a sampler would work. Essentially, the wave files are going to be VERY short (approximately 40ms or less), and I'll want they played...
  12. C

    Creating new sounds, to be controlled by MIDI

    So, this seems like it should be info that's fairly easy to find, but I've been doing quite a bit of googling, and keep coming up empty. So I turn to the experts for help: I'm thinking about writing some software to create interesting new synth sounds. Generating math, sampling the equations...
  13. C

    X or Z stand?

    It depends on what you need. I use a solid x-stand in my studio, where I'm sitting down, or if I'm going to jazz gigs, and am only taking one keyboard. If playing a show with a rock band, however, I massively prefer to stand up, and an x-stand isn't stable enough, and generally can't even reach...
  14. C

    Behringer FCB1010 and a korg Triton

    Hi guys. I'm looking at doing some major alterations to my midi setup, and I think buying an FCB1010 might make my life easier. Has anybody used one of these before? Better yet, has anybody used one on a KORG Triton (the original Triton). My setup has traditionally been to have my Triton...
Top