Add zone in setup mode

[Edenmark]

I am new to a pc3k7 having come from a pc88mx. To create a new zone in setup mode on the pc88 you simply pressed the zone button to activate it. I need to add additional zone(s) on the pc3k7 but can't figure out how. Can anyone help?

 

[happyrat1]

First of all are you trying to do this in Program Mode or Setup Mode?

And are you trying to set up layers or splits?

The Musician's Guide can be downloaded here.

http://kurzweil.com/product/pc3k7/downloads/

And Also Kurzweil has a series of video tutorials which really help here.

http://kurzweil.com/product/pc3k7/video/

Also for full support on Kurzweil products I strongly advise visiting these two forums.

http://forums.godlike.com.au/

http://www.ksetlist.com/

Gary

 

[happyrat1]

Also take a look at the Kurzweil Knoiwledge Base.

http://kurzweil.com/knowledgebase/pc3k7/

http://kurzweil.com/knowledgebase/pc3k7/setup_mode/

http://kurzweil.com/knowledgebase/pc3k7/setup_mode/323/

Gary

 

[delaware dave]

I'm doing this from memory but go to the setup, hit the edit button, then under the display there are soft buttons, press the furthest one to the left twice (it's under the '<more'). You should see the new zone, duplicate zone, delete zone choices.

You should read the manual ......