Audio/aux input on a Yamaha EW 300 and Microphones

[etp7]

Looking at the inputs in the back there are no microphone inputs. What would be the cheapest and easiest way to fix this for non professional use? Do they make a battery operated microphone with enough gain to drive the input?
Or am I doomed to buy a mixer?
I know the difference between low and high impedance and was curious. Would have spent more funds if it was a necessity. LOL
SAMS Club had an offer I could not refuse.

 

[Biggles]

Welcome, there is an Auxillary Input socket on the back of your EW that is intened for a device like an iPod,

A Mike may work if you connect it to the auxillary socket but do look in the Function Menu, turn fully down the Gain control and slowy increase it until, if you are lucky you then start to hear audio from the Mike out of the EW speakers. No guarantees and it is at your own risk.

 

[happyrat1]

Just buy a $50 mixer and route your mic that way.


Gary