Reply to thread

Message: [QUOTE="happyrat1, post: 185897, member: 4476"] According to the MG10X manual, the AUX output is controlled by either the FX knob OR the AUX knob. [URL='http://shopwl.com/content/MG10%20Mixing%20Console%20-%20Manual.pdf']http://shopwl.com/content/MG10 Mixing Console - Manual.pdf[/URL] According to page 18 of the MG16XU manual you have four AUX channels of which Channel 1 can be controlled Pre-Fader with Knob 1. [URL='http://shopwl.com/content/MG20%20Mixing%20Console%20-%20Manual.pdf']http://shopwl.com/content/MG20 Mixing Console - Manual.pdf[/URL] Since this manual also applies to the 12 channel version you may want to up your game to the 12 channel version. [URL]https://www.amazon.com/dp/B00IBIVLKQ/[/URL] Mind you, if you're travelling light it's a bit of a stretch weighing in at 12.5 lbs and dimensions of 8x16x19 inches. Then again I can state that the power supply is internal so there's no extra wall wart to drag along. Instead it uses a standard three pronged computer style power cable. It's up to you but I'd say you should try and definitively find out from Yamaha which models are pre and post fader. Gary ;) [/QUOTE]