Nordstage 3 midi roland edge

[moes63]

Ciao a tutti vorrei collegare in midi la keytar roland edge con la nord stage 3 76hp.
Lo scopo é utilizzare i preset della edge dalla nord stage 3. Quindi la nord prende i preset roland. Inoltre ogni preset roland edge deve essere associato a un preset della nord stage 3 76hp. Di conseguenza in live quando cambio i suoni dalla nord si associano i suoni roland edge.
Qualcuno può aiutarmi? Grazie

 

[johnincolorado]

Translate gives me this...I hope this is helpful:

Hello everyone, I would like to connect in midi the keytar roland edge with the nord stage 3 76hp. The aim is to use the edge presets from nord stage 3. So the north takes the Roland presets. In addition, each Roland Edge preset must be associated with a nord stage 3 76hp preset. Consequently, in live when I change the sounds from the north, the roland edge sounds are associated. Can anyone help me? Thank you

 

[anotherscott]

For Nord Programs to also change the which Roland sound is being called up on the AX-Edge, you'd use the Nord's EXT section to send a Program Change to the Edge. That sound would then be able to be played from the AX-Edge keyboard and/or the Nord's keyboard, as desired.

As for physical connection, you'd run a 5-pin MIDI DIN cable from Nord MIDI OUT to roland's MIDI IN. The cable can be up to 50' long. You can also use something like a CME WIDI Jack to make that connection wirelessly over bluetooth.