Samson Graphite 49 endless encoders

[Francisco Viggiola]

Hi! I've got Samson Graphite 49 keyboard. It's great! but I'm having a hard time with the encoders. They are Velocity sensitive. The faster you turn them, the faster you reach the end of a parameter. I can't slowly modify a parameter on one turn, I would need at least 3 turns, which make that the sound is not fluid.
any ideas on how to change this? If possible!

thanks!
Francisco

 

[goldi5210]

Hej Francisco,

see page 18 of the manual where you find the Available Velocity Curves and how to change them in the Setup Mode.

 

[Francisco Viggiola]

Hej Francisco,

see page 18 of the manual where you find the Available Velocity Curves and how to change them in the Setup Mode.

Thanks for the answer! I'll check it tonight. But I think that keys and pads can be modified, not the encoders.

Francisco

 

[happyrat1]

Actually it could be a latency issue with your computer. You might want to google a bit about MIDI latency and how to fix it.

 

[Francisco Viggiola]

Actually it could be a latency issue with your computer. You might want to google a bit about MIDI latency and how to fix it.

if it's a Latency issue, shouldn't I experiment the problem with all keys?
I'll check it! thanks for the tip!

 

[happyrat1]

Get back to us if it solves the problem. It would be useful info for others to know.

Gary