TECHNICS KN6000 MIDI PROBLEM

Joined
Feb 10, 2021
Messages
1
Reaction score
0
My KN6000 midi will not play my recordings from my floppy disk. I haven't played this keyboard in a long time. The keyboard works well but the midi after loading the disk won't play it when I press the "Start/Stop" button. There is nothing wrong with the floppy disk recordings, as I tested them on my KN2000 midi. I have always in the past been able to record, load and play from the KN6000 midi. I do not have the keyboard hooked up to my computer, by the way.
1. What could be the reason for it not playing the disk?
2. If I find another midi to buy, is it difficult installing a new?
3. Who works on Technics keyboards?
Thanks for any help you might be able to render!
 
Joined
Jan 14, 2021
Messages
130
Reaction score
25
Location
Zolder.B
reason for not playing the disk
Drums level volume is set to min
Sequencer play button on
clock is set to midi
check it out
 
Joined
Nov 26, 2024
Messages
1
Reaction score
0
Location
czech
My KN6000 midi will not play my recordings from my floppy disk. I haven't played this keyboard in a long time. The keyboard works well but the midi after loading the disk won't play it when I press the "Start/Stop" button. There is nothing wrong with the floppy disk recordings, as I tested them on my KN2000 midi. I have always in the past been able to record, load and play from the KN6000 midi. I do not have the keyboard hooked up to my computer, by the way.
1. What could be the reason for it not playing the disk?
2. If I find another midi to buy, is it difficult installing a new?
3. Who works on Technics keyboards?
Thanks for any help you might be able to render!
SOS - Jak má vypadat midi na disketě, aby jej TECHNICS 2000KN přečetl? (e-mail address removed)
 
Joined
Oct 21, 2024
Messages
37
Reaction score
29
Location
Norway
Try to see it there is any difference if load midi file format 0 contra format 1.
If this works, there is lot's of format 1 to 0 (and vice versa) free converter software to find at the web.
I remember my KN2000 (early production item) had a issue and could not play both formats.
One, or maybe it was two of the internal IC bricks had to be replaced because this matter could not be updated via software at floppy disks.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

Forum statistics

Threads
14,472
Messages
90,216
Members
13,408
Latest member
ObiJohn

Latest Threads

Top