Korg PA settings for Eq


Joined
Sep 6, 2017
Messages
2,087
Reaction score
1,406
Location
Lancashire, UK.
The standard default settings in a Korg PA is for them to be Off.

There are a number of available presets that become available once the Eq is turned on.

Even then they produce a fairly flat response.

Here is what I set my PA to for Preset 1, I then have some other permutations for the remaining available presets.

AF665568-C2ED-4128-924D-8175E14D6E7C.jpeg
 
Ad

Advertisements

Joined
Oct 23, 2019
Messages
1
Reaction score
0
Thanks for sharing! Do you mind sharing also your Limiter setting? Appreciate it!!
 
Joined
Sep 6, 2017
Messages
2,087
Reaction score
1,406
Location
Lancashire, UK.
A word of warning on the settings, they are for my external PA system.

You may want to use a bit less gain if using the internal speakers.

My suggestion would be to use each of the six Presets for different environments.

I find this one pretty good for my headphones as well as my PA system

I will take an image of my Limiter settings and post it asap
 
Joined
Jun 9, 2019
Messages
30
Reaction score
7
Location
Hertfordshire UK
Hi Col, I am usually a bit cautious doing things as I only hear in mono. Will it be ok to use this setting as I do not have external amps just keyboard.
 
Joined
Sep 6, 2017
Messages
2,087
Reaction score
1,406
Location
Lancashire, UK.
If you just turn on the Eq in Global and then select a preset from the drop down menu then exit and play.

Repeat the preset change until one gives you the best sound for your hearing.

No need to make any adjustments until you have tried each preset and then it is up to you to make small adjustments at a time to fine tune, once youhave a setup that suits save the preset.
 
Ad

Advertisements

Ad

Advertisements


Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top