FC7 vol ped with S90xs Yamaha

[Albe]

S90xs has 4 volume sliders l use for 4 different sounds, called zones,
Can FC7 pedal zero in on the volume of just one zone, 4 ?
I changed something in UTILITY to cc7, but it affects all 4 zones. Also went EDIT, not much help. Manual? no help.

Appreciate any help on this, thank you.

 

[SteveP]

S90xs has 4 volume sliders l use for 4 different sounds, called zones,
Can FC7 pedal zero in on the volume of just one zone, 4 ?
I changed something in UTILITY to cc7, but it affects all 4 zones. Also went EDIT, not much help. Manual? no help.

Appreciate any help on this, thank you.

Don't know if you ever got an answer to this... as your post was in 2019 ...lol
But in case other people find this post in Google Land, I'll post how I do it.
1. Utility - Select FC2 ctrl No to 11 (Expression pedal to be plugged into FC2 socket) - save
2. In performance - eg controlling zone 4 volume only - go to Edit mode - select zone 4
- Select Rcv and scroll down to Foot Ctrl 2 and select ON (Turn Foot Ctrl OFF on the other 3 zones)
- Still in Rcv - scroll to Expression and select it to ON (Select OFF for the other 3 zones)
- I turn off all other controllers not in use. eg Assn 1 and 2 etc..
Save
There are quite a few S90XS s still in use and the manual is not very helpful at all.